Cattle head bail Pre galvanized, zinc coating 100 g/m² Fully 360 degree welded 2050 mm high, 1060 mm wide Internal width is 750 mm(does not including vertical tube) All the tubes are 50 x 50 x 2 mm square tubes Galvanized sheet, 1.0 mm thick With welded caps 8 U lugs,100 x 60 x 4 mm 2 flat feet, 50 x 110 x 4 mm And pins hang on the lugs
Sliding gate Pre hot dipped galvanized, zinc coating 100 g/m² 2050 mm high, 1060 mm wide Frame tube: 50 x 50 x 2 mm Internal width is 750 mm(does not including vertical tube) 6 Rail of 40 x 80 x 2 mm with the rail evenly spaced Big Pulley: 3 sets per door A small plastic wheel in the bottom Handle:32 mm round pipes With welded caps 1 flat feet With 8 U lugs: 100 x 60 x 4 mm And pins hang on the lugs
Cattle panel on one side Pre galvanized, zinc coating 100 g/m² Fully 360 degree welded 2000 mm high, 3050 mm long. All the tubes are 50 x 50 x 2 mm With 7 rails, 4 rails with galvanized sheet, 3 rails are not. Galvanized sheet is 1.0 mm thick. With caps, lugs and pins
Cattle panel gates on the other side Total 2000 mm high, 3050 mm long. All the tubes are 50 x 50 x 2 mm Total 4 doors, with spring latched lock Longer door, inertial wide is 1995 mm Smaller door, internal wide is 725 mm With caps, lugs and pins