New Building Galvanized Cattle Crush Round Cattle Yard (XMM-CY)

• Condition: New
• Type: Heat Preservation, Breeding, Feeding
• Material: Steel
• Usage: Cattle, Horse etc
• Transport Package: Packed on Steel Pallets
• Trademark: XM
• Model NO.: XMM-CY
• Origin: China
• HS Code: 73089000
• Production Capacity: 500 Pieces/Day

Product Description

New building galvanized cattle crush round cattle yard(XMM-CY)

Cattle panels are ideal way to get cattle yards built fast. These panels are also portable and suitable to set up holding yards of any size. They come in four different configurations to suit your requirements. Tough and strong, they withstand a range of stock pressure and come ready to use with 16mm pins included.
It is super simple and quick to put together. All options have two sets of double lugs and two single lugs welded to the panel for inserting cattle pins to hold them together. It takes a mere seconds to drop the cattle pins into the lugs on every panel and they are ready to position and use. Cattle fence panels give you the flexibility to build semi-permanent yards of any size suitable for working cattle and loading for transport.

1)Cattle yard panels
Cattle panels come in 3 options, and each design offers a certain level of protection from stock bruising. round pipe, square tube and oval pipes are available.
Made from elongated galvanised oval pipe they form large, easy to see cross rails.
the cross rails are galvanised steel tube and tough enough to last a lifetime.
Short cattle panels are ideal when building curves into a race to work stock when away from the main yards. These are exactly the same as the cattle panels, except short cattle panels are 1.8 m wide. They come in different configurations to suit your requirements and budget.

Pre hot dipped galvanized pipes
1.8m high x 2.1m wide
Round pipes: 42mmO.D or 32mmO.D pipes
Square tubes: 40x40mmRHS or 50x50mmRHS
Oval rails:30x60mm,40x80mm or 115x42mm
With welded caps,lugs and flat feet
Pins also supplied


2)Cattle crush has an internal width 750mm, overall length about 3.05m, 4 doors on the operating side and no doors on the other side. The cattle crush is supplied as 4 pieces kit(headbale, 2 sides & a slide gate)which just pins together.
 

Cattle headbail	With auto-wrench Pre galvanized, zinc coating 100g/m2 Fully 360degree welded, 2050mm high, 1650mm wide Internal width is 750mm(does not including vertical tube)  All the tubes are 50x50x1.6mm square tubes Galvanized sheet,      With welded caps	1 piece
Sliding gate	Sliding gate Pre hot dipped galvanized,zinc coating 100g/m2 2050mm high, 1060mm wide Frame tube: 50x50x2mm Internal width is 750mm(does not including vertical tube)  6 Rail of 40x80x1.6mm with the rail evenly spaced Big Pulley: 3 sets per door A small plastic wheel in the bottom Handle:32mm round pipes  With welded caps 1 flat feet With 8 U lugs: 100x60x4mm	1piece
Crush panel	Cattle crush side panel                                                            Cattle panel on one side  Pre galvanized, zinc coating 100g/m2 Fully 360degree welded 2000mm high, 3050mm long. All the tubes are 50x50x2mm With 7 rails, 4 rails with galvanized sheet, 3 rails are not. Galvanized sheet is 1.0mm thick. With caps, lugs and pins                                                                                                                                                            Cattle panel gates on the other side  Total 2000mm high, 3050mm long. All the tubes are 50x50x2mm Total 4 doors, with spring latched lock Longer door, inertnal wide is 1995mm Smaller door, internal wide is 725mm With caps, lugs and pins	1 set

3)Sliding gates
Pre hot dipped galvanized pipes
2050m high,1060mm wide
Internal width is 750mm
6 Rail of 40x80 with the rail evenly spaced
Pulley:3 sets per door
Handle:32mm tube
Thickness: 1.6mm
With welded lugs and pins

4)Cattle crush

Hobby Farm Vet Crush Sheet
ed, Rear Handle Operation, internal width 750mm, overall length 3m, 4 doors on the operating side and no doors on the other side. The Vet Crush is ratchet operation and is supplied as a flat pack (Headbale, 2 sides, slide gate, bolt on ratchet and bolt on operating handle).

There are simple and complex cattle crush for your choice.
2.2m high
3m long
Outside 850mm wide

5)Bale feeder

The bale feeder helps maximise every bale of hay. The mesh at the bottom allows airflow through to stop hay getting wet and rotting from the bottom up. Diagonal tubing prevents cattle pulling hay out of the feeder to minimise loose feed wastage. This is an investment that will last a lifetime. Quick and simple to erect and move to wherever it is needed, the hay bale feeder comes with everything you need to set up and use straight away.

There are three types available.
Round type, Oval type and rectangle type

Pre hot dipped galvanized pipes
Round type : is 2m diameter, 1.06m high
Oval type: 4.46m long, 2.1m wide,1.06m high
Rectangle type: 2.1m long, 1.32m wide, 1.8m high
With accessories


6)G-Force yard
Fully built galvanised, with top of the range steel
Built with no short cut in work and with 2 fully engineered employes
This is a blind force yard, cattle will move easier and quieter without fuss as they cannot see out
Comes complete with pins to erect and take 10 minutes to put up
The gate locks in with 2 barrel spring loaded levers which they will lock on the push of the gate

Pre hot dipped galvanized pipes
2.4m diameter, 2m high 
Support pipes:75mmO.Dx2.5mm
Vertical pipes:60mmO.Dx2mm
Inner pipe and bottom pipes: 48mmO.Dx2mm
Galvanized sheet: 1.15mm widex2.07mm longx1.0mmthick
With automatic lock - cattle can only travel in one direction


7)Portable loading ramp
The adjustable ramp comes flat packed easier freighting. Assembly its with nuts and bolts and requires at least two people. Ideal for situations where you may need to move the ramp in the future. An optional ramp walkway is available on request to make stock loading even easier.

Pre hot dipped galvanized pipes
Total 3242mm high
2850mm long
750mm wide
Vertical frame tube 60x60x2mm
Top Sidelong tube 40x40x2m
Side galvanized sheet 1.6mm
Bottom side long tube 60x60x2mm
Galvanized footboard 2mm thick
With Frame tube 50x50x2mm
And 40x40x2mm and 25x25x2mm tubes welded on the footboard.
With other accessories


More products we can do, if you need it, contact us for a free quote now !